CL54 Induction  Loop Controller
Suitable for large audiences

Max. loop current : 15Amp
Max. loop Voltage : 65Volt
Better than 0.1% distortion at 1 KHz.
Heavy duty toroidal power transformer
Thermal overload protection
Short circuit protection

The CL54 construction is very rugged. It is housed in a strong aluminum chassis. A large heatsink on the rear of the cabinet dissipates the heat generated by the amplifier. A thermal cutout mounted on the heatsink shuts the amplifier off in case it gets too hot.
The CL54 connect directly to the mixer board with 1/4" jack. The induction loop connects with 5-way binding posts. Rack mount kit is available.

Specifications:

Frequency response			20Hz to 20 KHz, +/ -1 dB


Harmonic distortion @ 1KHz, 1W		0.1% or better

Input Sensitivity			1VRMS for full output.

Input impedance				50K

Max Peak Output Current			15A

Output Load				ANY

Dimensions				17" x 3.5"" x 12.5"" (WxHxD)"

Power requirement			120VAC, 6A fuse

Construction				All metal cabinet, black with white legend

Front panel:

On/Off switch

Loop voltage minitor

Loop current monitor

Rear Panel:

Power entry connector

Fuse 

Output connectors (Binding posts)

Single ended input connectors (1/4" jack)

Options:
Rack mounting kit.

220/240VAC line power input.
Ordering Information:

CL54-AA		Fully assembled and tested	

MB401-R		Rack mounting kit 

Option 220V	220/240VAC line power input 

For free manuals download go here.
For pricing go here.
Back to Marchand Electronics Inc. Home Page.