115/230 VAC , 50/60Hz input.
Dual +/- 15 Volt Regulated Supply.
250 mA each output.
Short circuit protected.
Small 2.0" x 4.3" circuit board.
Powers up to 16 XM1 crossovers.
LED voltage indicators.
The PS10 power supply provide +15 Volt and -15 Volt regulated DC power at up to 250 mA of current per output. The two outputs have a common ground connection. The outputs are short circuit proof. A thermal protection turns the outputs off when the circuit is overheated. A low input to output stray capacitance guaranties a low AC leakage current and makes the PS10 well suited in applications where low hum and noise is important, such as low level pre-amplifiers and audio applications. The PS10 uses a dual winding AC transformer. A Light Emitting Diode at each output indicates proper output voltage.
Specifications Output voltage: . . . . . . . . . . . . . +/- 15 Volt, +/- 5% Max continuous output current:. . . . . . 250 mA each channel Output short circuit current: . . . . . . 1.5A, typical. Nominal input voltage:. . . . . . . . . . 115/230VAC, 50/60 Hz Output voltage ripple:. . . . . . . . . . less than 10mV, @ 60 Hz, 250 mA load Output voltage regulation:. . . . . . . . better then 10 mV Input to Output capacitance:. . . . . . . 50 pF Max. Dimensions (L X W X H): . . . . . . . . . 4.3" X 2.0" X 1.5" Ordering Information PS10-B Bare board with manual PS10-K Kit with manual and all parts PS10-A Fully assembled and tested PS10-M Manual only
For free manuals download go here.
For pricing go here.
Back to Marchand Electronics Inc. Home Page.